SuperFly RC - Durable Electrics Made Easy

HyperFlea

Accessories and Kit Combos

We accept all major credit cards, Google Checkout and PayPal

24 hour online ordering

or order by phone

(512) 686-4249

HyperFlea kit

The all new 22" HyperFlea has been designed from the ground up for higher speeds and stability. Featuring a new, sleeker canopy, 3 degree sharper delta, lengthened airframe, wingtips and larger elevons. These changes allow the model to attain higher speeds then previous models. Cut from high density EPP foam, it holds steady at speed and has tremendous damage resistance.

With the included powerful brushless Emax CF2805 motor turning the supplied APC 6x4E prop the HyperFlea can produce 12.6 oz of static thrust when using the recommended PolyQuest or Hyperion 2s. 7.4v 800 mah battery.

HyperFlea Combo, with Transmitter

Includes the HyperFlea Kit, Hitec Laser 4 channel radio, Berg Microstamp 4L Receiver and (2) BlueBird BMS-306 servos, ThunderBird 18 amp brushless speed control, Hyperion VX Lithium Polymer 7.4V 800mAh 20C, (DOES NOT INCLUDE CHARGER, AVAILABLE SEPARATELY.) and 1 pair Micro Deans Connectors. -requires building supplies such as paint, hot glue gun, razor blades etc.-Please note the Berg Microstamp has auto shift selection, it will work with both Futaba and JR.

HyperFlea Combo, No Transmitter

Includes the HyperFlea Kit, Berg Microstamp 4L Receiver and (2) BlueBird BMS-306 servos, ThunderBird 18 amp brushless speed control, Hyperion VX Lithium Polymer 7.4V 800mAh 20C, (DOES NOT INCLUDE CHARGER, AVAILABLE SEPARATELY.) and 1 pair Micro Deans Connectors. -requires building supplies such as paint, hot glue gun, razor blades etc.- Please note the Berg Microstamp has auto shift selection, it will work with both Futaba and JR.

FOAM ONLY kit of the HyperFlea

Only the following EPP foam parts are included with this kit: CNC cut wings, EPP elevons, stabilizers and canopy. You provide your own hardware and motor. The instructions may be downloaded from the Instructions page. See the Planes page for specs. NOTE: Performance may vary depending on equipment used.

Replacement HyperFlea Canopy

Replacement CNC cut EPP canopy for the HyperFlea. Comes with black plastic mounting plate and (4) mounting screws. Use this with firewall mount brushless motors such as the Emax CF 2805. Has pre-cut slot for battery and electronics. This works great for outrunner upgrades on the SuperFly, SuperFlea or HyperFlea. PLEASE NOTE: Canopy will be unpainted and WHITE.

Assembly for HyperFlea
Don't have time to build?
Add this to the shopping cart after you select one of our SuperFly kits or combos and we will build and paint your new plane then ship it to you in a big box! If you get a combo with transmitter we will set it up for you! Please note that this may delay your shipping date by 5 business days.
Planes will come with a black canopy and 1 color on the top leading edge. Please select color<<<<

... Back To Top ↑

Hitec Laser 4 channel transmitter
The Laser 4 was created as a replacement to the venerable Focus 4 series of radios. Not wanting to offer just a replacement we added features such V-tail and Elevon mixing and an ergonomic case, the Laser 4 represents the most complete entry level 4 channel radio money can buy.
Features:
4 Channel 72 mHz FM Transmitter
All Channel Servo Reverse
ATV Channel 1 and 2
Channel 1 and 2 Elevon Mixing
Channel 2 and 4 V-Tail Mixing
5 LED Battery Power Meter
Trainer Capable
Low Battery Alarm
Includes: 72MHz Transmitter, Switch harness, Transmitter NiCd's & Charger
This is the Transmitter ONLY. You will need receiver and servos. Channels are Limited.

Berg Microstamp 4L Full Range Receiver
Now manufactured by Castle Creations, the Berg Microstamp 4L is even smaller and lighter than the previous version. This full-range, 4-channel receiver has an on-board microprocessor with new software for nearly glitch free performance. The True Digital Signal Processing TDSP software uses adaptive algorithms to filter out invalid pulses for virtually glitch free performance even in harsh RF environments like indoors. In addition, the receiver has Transmitter Signal Recognition TSR software. Upon power up, the receiver learns the characteristics of your transmitter like positive JR-Airtronics or negative Futaba-Hitec shift, number of channels, trigger pulse length and approximate frame rate. Once learned, the receiver locks onto your transmitter and rejects signals from other transmitters that have different characteristics. Finally, it has a programmable fail-safe function. In the event of a signal loss, it can be programmed to hold the last good servo positions, and upon extended signal loss, automatically switch to pre-programmed servo positions that you can set, for example, to cut the throttle, apply slight up elevator and left rudder to perform a gentle descending circle. Crystal sold separately.
Channels: 4
Filtering: Triple tuned RF with steep flank 8 pole IF ceramic filter set
DSP: Yes, with Transmitter Signal Recognition
Shift Type: Auto Detect positive or negative
Sensitivity: Approximately 2.0uV
Fail Safe: Programmable with position hold and pre-programmed positions
Weight: 4.7 grams 0.17 oz with shrink wrap and antenna
Dimensions: 0.6 x 1.35 x 0.35 in.

Receiver crystal
This crystal will work in Blue Arrow R3P4, Plantraco DSP4, DSP4-SC, Blue Bird BMR receivers, GWS R-4P, GWS R-6N and Berg 4L.

... Back To Top ↑

GWS V-Tail Mixer
This device is to mix functions aileron and elevator controls. This is used for a V-Tail or flying wing type aircraft. Use this in the SuperFly if your transmitter does not do elevon mixing.

BlueBird BMS-306 Servo
Weight: 6. grams / 0.21 oz, Torque: 12 oz. in., Speed: 0.11 sec./60 degrees at 4.8V. Use these in the SuperFlea. Works with Hitec and JR receivers.

... Back To Top ↑

Castle Creations ThunderBird 18 brushless speed control
Recommended for 2 OR 3 cells on the SuperFly. The Thunderbird-18 features automatic lipo detect cutoff right from the package! Just plug in and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH)! Features automatic Li-Poly cell detection right out of the package - automatically adjusts cut-off voltage to match 2S or 3S Li-Poly packs. Also features- BEC Safe power on, Low torque, soft start protects gear boxes from shock. Simple setup. Tough surface mount construction. Smooth reverse exponential throttle. Audible arming signal. Self-calibrating endpoints. Auto motor cut-off with reset. Auto shut-down when signal is lost. Microprocessor controlled. Compatible with PHX-Link USB programmer. Weighs .6 oz

DN Power Micro-Controlled LiPo Parallel Charger with LCD Display

Product Features:
1. Input voltage: DC 11V~15V. The working electric current is less than 6A when it is charging at full load. The current of the fuse is 10A which could prevent short circuit.
2. The charge current is 0.2A~2.0A and the adjusting step is 0.2A which can be set by the buttons on the board.
3. Controlled by 4 separate internal micro computers. Will charge 1S-4S battery separately and is like no other serial charging + balancer setup on the market. More efficient.
4. 4 separate JST style charging ports, one general charging port.
5. Big LCD display. Displays real-time voltage and charging processing clearly and separately.
6. Low voltage protection, won't charge any cell if voltage is lower than 2.7v.
7. Automatically stops charging and a buzzer will sound when it's done.
8. 4 separate parallel charging circuits ensure your battery is 100% fully charged. Higher efficiency.
9. Charge mode of the balanced parallel connection:
A. charge in parallel connection for one single cell or four single cells at one time
B. charge in parallel connection for one or two lithium (2s) packs at the same time.
C. charge in parallel connection one (3s) lithium pack and (or) one single lithium cell at one time
D. charge in parallel connection for a four series (4s) lithium pack.
10. Working rating: -20 ~ 60 C
11. Full circuit protection: protects the charger and battery even when connecting the battery or the power supply backwards..
12. General charging port will allow you charge any lipo battery which has balancing leads.

NEVER leave batteries unattended while charging.

Requires charging adapters to fit Etec, PolyQuest or Apache 2s or 3s batteries. See below.

2s Charge Adapter
Charging adapters for 2s Etec, Hyperion or PolyQuest Lipo Batteries for use with DN Balance Pro Charger.

NEVER leave batteries unattended while charging.

3s Charge Adapter
Charging adapters for 3s Etec, Hyperion or PolyQuest Lipo Batteries for use with DN Balance Pro Charger.

NEVER leave batteries unattended while charging.

2/3 CELL LI-POLY BATTERY CHARGER

This is a BASIC CHARGER with a selectable switch for 2 or 3 cell Lithium Polymer batteries. Charge rate from .8A - 1.0A. An indicator light shows the charging process. Comes with JST style connector, don't forget to get a connector for your battery type.

Input: 12 Volts

NEVER leave batteries unattended while charging.

... Back To Top ↑

DN Power 5A Power Supply
Converts 100-240v AC to 12V 5A DC power

Works with DN Balance Pro Charger or DN Basic Charger or anything requiring a 12v 5A power source.

2/3 CELL BALANCING LI-POLY BATTERY CHARGER

A simple to use small balancing charger for Lithium Polymer packs from E-Sky, EFlite, Dynam and others with .100" pitch white balancing connectors.

Note – Only works with PolyQuest and Etec batteries using adapters listed below.

Features:
• For 2-cell (7.4V) and 3-cell (11.1V) Li-Poly Packs
• Fixed charge rate of 800 ma (recommended for 800mah-1200mah Li-Poly packs)
• 10.0V - 15V DC input
• Has barrel connector and alligator clips for DC input voltage
• Automatic balancing of multi-cell packs while charging
• Balancing connector fits E-Sky/EFlite Li-Poly batteries or PolyQuest with adapter
• Separate power and charging LEDs

Input: 12 Volts

NEVER leave batteries unattended while charging.

... Back To Top ↑

Esky to PolyQuest 2s Charge Adapter
Charging adapters for 2s Etec, Hyperion or PolyQuest Lipo Batteries for use with Esky Balance Charger.

Esky to PolyQuest 3s Charge Adapter
Charging adapters for 3s Etec, Hyperion or PolyQuest Lipo Batteries for use with Esky Balance Charger.

Esky 1.5A Power Supply
Converts 120V AC to 12V 1.5A DC power

Works with Esky Balance Charger or anything requiring a 12v 1.5A power source.

Hyperion VX Lithium Polymer 7.4V 800mAh 20C
Weighs 1.69 oz. Good for 20C or 16 amps with 30C (3 sec) burst. Perfect battery for the HyperFlea. Comes with E-Tec/ PolyQuest/ Hyperion style balancing connectors balancing taps which requires the balance adapter listed above to work with the DN Balance Pro Charger. ONLY use an approved Lithium Polymer Charger with this battery! NEVER leave batteries unattended while charging. (Requires a high current connector like the Deans Micro)