The HyperFlea has been designed from the ground up for higher speeds and stability.
Featuring a new, sleeker canopy, 3 degree sharper delta, lengthened airframe,
wingtips and larger elevons. These changes allow the model to attain higher
speeds then previous models. Cut from high density EPP foam, it holds
steady at speed and has tremendous damage
resistance.
With the recommended powerful brushless Emax CF2805
motor turning an APC 6x4E prop the HyperFlea can produce 12.6 oz of
static thrust when using the recommended Hyperion Lithium Polymer 7.4V 850mAh 25C battery.
The stall resistant, ultra stable, extremely predictable HyperFlea can
do it ALL! Assembly time is under 4 hours with flights that can last 10
minutes or more! Be sure to check out the photo gallery and movie
section!
In an effort to "Go Green" SuperFly RC will not be including instructions with kits anymore.
They will be available here 24/7/365 for download:
Click HERE to download the HyperFlea instruction manual!
Kit
includes:
- EPP wing cores
- EPP elevons
- EPP canopy
- EPP for vertical stabs.
Specs:
- Wingspan: 22 inches
- Length: 18.75 inches
- Weight RTF: 6.5-6.9 oz.
Requires:
- Radio (3 channel with elevon mixing)
- Micro Receiver
- (2) sub-micro servos
- 3mm prop adapter
- Battery - 2 cell 7.4v 800-900 mah Lipoly
- 18 amp Brushless ESC
- All hardware
- Brushless Emax CF2805 motor
- APC 6X4E prop
- Battery Charger
- Flight Support Equipment
Assembly Materials:
Low Temp Hot
Glue gun and paint. Does NOT have to be foam safe!
HyperFlea Instruction Manual