The HyperFlea has been designed from the ground up for higher speeds and greater agility than the SuperFly. It retains all the stability but is just slightly more aggressive than the SuperFly due to the 3 degree sharper delta, lengthened airframe, wingtips and larger elevons. These changes allow the model to attain higher speeds then previous models. 

Cut from high density EPP foam, it holds steady at speed and has tremendous damage resistance. 

With the recommended (but not included brushless Emax CF2805, it is available via a drop down menu as an accessory below) motor turning the the recommended APC 6x4E prop the HyperFlea can produce 12.6 oz of static thrust when using the recommended Hyperion Lithium Polymer 7.4V 850mAh 25C battery.

The stall resistant, ultra stable, extremely predictable HyperFlea can do it ALL! Assembly time is under 4 hours with flights that can last 10 minutes or more! Be sure to check out the photo gallery and our videos at YouTube!

In an effort to "Go Green" SuperFly RC will not be including instructions with kits anymore.

They will be available here 24/7/365 for download:

Click HERE to download the HyperFlea instruction manual! 

Kit includes:

• CNC cut wing cores
• EPP elevons and pre-shaped canopy
• All DUBRO hardware (.032 pushrods,  micro control horns, micro EZ links)
  

• Wingspan: 22 inches
• Length: 18.75 inches
• Weight RTF: 6.5-6.9 oz.

• Radio (3 channel with elevon mixing)
• CF2805 Brushless motor w/ prop adapter
  
• APC 6x4 Prop
  
• Micro Receiver
• (2) sub-micro servos
• 3mm prop adapter
  
• Battery - 2 cell 7.4v 800-900 mah Lipoly
• 18 amp Brushless ESC
• Battery Charger
• Flight Support Equipment

Low Temp Hot Glue gun and paint. Does NOT have to be foam safe!