The SuperFly has been
designed from the ground up for extremely durable flying. Extremely
stable, high alpha slow flight coupled with a wide speed envelope is the
name of the game. Cut from high density EPP foam, it holds
steady at speed and has tremendous damage
resistance.
We suggest the CF2812
motor turning a GWS 8X6 prop. Equipped this way, the SuperFly can produce 17oz oz of
static thrust when using the recommended Hyperion Lithium Polymer 7.4V 1300mAh 25C battery.
The stall resistant, ultra stable, extremely predictable SuperFly can
do it ALL! Assembly time is under 4 hours with flights that can last 10
minutes or more! Be sure to check out the photo gallery and movie
section!
In an effort to "Go Green" SuperFly RC will not be including instructions with kits anymore.
They will be available here 24/7/365 for download:
Click HERE to download SuperFly Instruction Manual!
Kit
includes:
- EPP wing cores
- EPP elevons
- EPP canopy
- EPP for vertical stabs
- Hardware (pushrods, control horns, motor stick)
Specs:
- Wingspan: 27 inches
- Length: 18.75 inches
- Weight RTF: 9-12 oz.
Requires:
- Radio (3 channel with elevon mixing)
- Micro Receiver
- (2) sub-micro servos
- Battery - 2 cell 7.4v 450-1300 mah Lipoly
- 18 amp Brushless ESC
- All hardware
- Brushless CF2812 motor or equivalent
- GWS 8X6 prop
- Battery Charger
- Flight Support Equipment
Assembly Materials:
Low Temp Hot
Glue gun and paint. Does NOT have to be foam safe!
SuperFly Instruction Manual